Data sheet ACT20M ACT20M-CI-CO-ILP-S Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image, Similar to illustration ACT20M: The slim solution * Safe and space-saving (6 mm) isolation and conversion * Quick installation of the power supply unit using the CH20M mounting rail bus * Easy configuration via DIP switch or FDT/DTM software * Extensive approvals such as ATEX, IECEX, GL, DNV * High interference resistance General ordering data Type Order No. Version GTIN (EAN) Qty. ACT20M-CI-CO-ILP-S 1176070000 Signal converter/insulator, Input current loop feed, 1-channel, Input : 4-20 mA, Output : 4-20 mA 4032248970148 1 pc(s). Creation date December 23, 2018 5:31:10 PM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1 Data sheet ACT20M ACT20M-CI-CO-ILP-S Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Depth Net weight 6.1 mm 112.5 mm 114.3 mm 80 g Width (inches) Height (inches) Depth (inches) 40 C / 93 % rel. humidity, no condensation -25 C -40 C -25 C...+70 C Operating temperature, max. 0.24 inch 4.429 inch 4.5 inch Temperatures Humidity Operating temperature, min. Storage temperature, min. Ambient temperature Storage temperature, max. Operating temperature Storage temperature 70 C 85 C -25 C...70 C -40 C...85 C Probability of failure MTBF 699 Years Environmental Product Compliance REACH SVHC Lead 7439-92-1 Input Number of inputs Input current Input frequency 1 Sensor Voltage drop, current input Current source 1.25 V + 0.015 Vout @25C 1 100 Hz Output current load impedance current 0...20 mA, 4...20 mA 600 < 0.1 % of measuring range 2-way isolator 30 mW per channel Loop powered, via 4...20 mA input Configuration IEC 61326-1, NE 21 2.5 kVeff / 1 min. 300 Veff Galvanic isolation Pollution severity Surge voltage category 0...20 mA, 4...20mA 100 Hz Output Number of outputs Cut-off frequency (-3 dB) General data Accuracy Galvanic isolation Power consumption Supply voltage Mounting rail Step response time Temperature coefficient none TS 35 5 ms 0.01 % / C Insulation coordination EMC standards Insulation voltage Rated voltage 2-way isolator 2 II Data for Ex applications (ATEX) Marking II 3 G Ex nA IIC T4 Gc Creation date December 23, 2018 5:31:10 PM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2 Data sheet ACT20M ACT20M-CI-CO-ILP-S Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Connection data Type of connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min. Screw connection 0.6 Nm 0.5 mm 0.4 Nm 2.5 mm 2.5 mm AWG 30 Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. KEMA10ATEX0183X Certificate No. (IECEX) IECEXKEM10.0090X EC002479 EC002653 27-21-01-20 27-21-01-20 27-21-01-20 ETIM 4.0 ETIM 6.0 eClass 7.1 eClass 9.0 EC002653 EC002653 27-21-01-20 27-21-01-20 AWG 14 Ratings IECEx/ATEX/cUL Certificate No. (ATEX) Classifications ETIM 3.0 ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1 Product information Product information Descriptive text technical data Instructions for accessories The ACT20M-CI-CO-ILP-S passive isolator isolates standard analogue current signals.An analogue input current signal is linearly converted to an analogue output current signal and is galvanically isolated. Power is supplied through the input measuring circuit (input loop-powered). Power supply optionally over the DIN mounting rail CH20M DIN mounting rail, see Accessories Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation Declaration of Conformity CAT 4.1 ELECTR 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Instruction sheet Creation date December 23, 2018 5:31:10 PM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3 Data sheet ACT20M ACT20M-CI-CO-ILP-S Drawings Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Connection diagram Creation date December 23, 2018 5:31:10 PM CET Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4